[J Patrick]

Removed the center medallion and cut a donut from ABS to trim this clock I purchased from Amazon (ASIN: B07894DGTR, <$20). The clock fit so snugly in the hole I used no additional hardware to secure and it hasn't budged. Used fuse taps to supply continuous power to clock and to internal light (replaced incandescent with LED) when ignition is on.

[Brian_MN]

Removed the center medallion and cut a donut from ABS to trim this clock I purchased from Amazon (ASIN: B07894DGTR, <$20). The clock fit so snugly in the hole I used no additional hardware to secure and it hasn't budged. Used fuse taps to supply continuous power to clock and to internal light (replaced incandescent with LED) when ignition is on.

I like it, looks like it belongs there!

[J Patrick]

J Patrick
I like it, looks like it belongs there!

Thanks!

[IndyVandy]

Nice! i like it better than mine

[J Patrick]

Nice!  i like it better than mine

Thanks! Bet yours was a lot easier to install! 

[louperez]

I cannot seem to find it on Amazon. Please provide the title of the listing on Amazon, thanks. 

[J Patrick]

Try searching for “LUCH” VINTAGE CAR CLOCK SET. Apparently no longer available on Amazon, but I found it listed elsewhere. Also look at https://plumbaroakland.com/best-automoti...ck-gauges/  . HTH!

[louperez]

Try searching for “LUCH” VINTAGE CAR CLOCK SET. Apparently no longer available on Amazon, but I found it listed elsewhere. Also look at https://plumbaroakland.com/best-automoti...ck-gauges/  . HTH!

Thanks, I found it.

[Orchestr8]

https://www.amazon.com/Car-Dashboard-Clo...B07894DGTR

Try searching for “LUCH” VINTAGE CAR CLOCK SET. Apparently no longer available on Amazon, but I found it listed elsewhere. Also look at https://plumbaroakland.com/best-automoti...ck-gauges/  . HTH!