01-12-2020, 09:48 PM
(01-12-2020, 09:06 PM)coolwhip Wrote: I have the same problem seeing the lights on the switch. I have my 2018 VV apart right now, so took a picture of the backside of the switch. A lot of wires come out of the switch, but I would only need 1, or 2 positions, since even on low I find mine gets too hot. If you figure it out, please post your method of wiring.I could see the picture you posted. With 6 wires, probably would have to apply the multimeter and see which wires have voltage as the switch is cycled. I would hope I could isolate a single pair to hook to a toggle switch. Not sure changing the switch is enough motivation by itself to do the disassembly!