03-02-2020, 02:34 PM
(03-02-2020, 12:30 PM)Fiddyfoe Wrote: As usual, no instructions with VDH parts. It’s a pretty easy plug and play. Mine’s a 2019 so YMMV. Remove the steering column shroud (4 or 5 philhead screws) and on top you’ll see a flat plug matching the CC harness. Disconnect it and plug the CC harness into it, male to female, female to male. Only one way to do it. Remove two of the toggles from the dash and install the CC harness toggles from the back of the dash. Route wires properly. Good luck ascertaining function. I let my random toggle installation train me after playing with the dynamic once installed. One is on/off/cancel, one is +/-/set. The vehicle is already programmed for it. You are just spending a bunch of dough for ten bucks worth of toggles, wires and plugs to access the capability. You should have two original toggles left over when done.Thanks for the info. Sounds easy enough. We'll see how it goes.